Sorry, you must be logged in to use the shoutbox!

Author Topic: Hayes Stroker Ryde levers  (Read 1926 times)

0 Members and 1 Guest are viewing this topic.

Offline Slowy

  • Cycling Sherpa
  • ***
  • Posts: 451
  • Karma: +28/-90
  • Gender: Male
Hayes Stroker Ryde levers
« on: November 11, 2008, 01:56:35 PM »
does anyone know where i can buy JUST the lever to replace my broken one?
everywhere i look only has the whole setup (levers, lines, calipers, rotors, etc)

i haven't ridden since my Santos rock smash spectacular and i wanna ride in the cooler weather!!!


thanks SWAMP
Joe


"a smite a day keeps the trailbugs away"!

Offline BillT

  • INCONCEIVABLE
  • Yellow Jersey
  • *****
  • Posts: 1840
  • Karma: +87/-163
  • My Bike: Intense Uzzi VPX w/ 'Slacker' dropouts
Re: Hayes Stroker Ryde levers
« Reply #1 on: November 11, 2008, 02:01:00 PM »
you won't find just a lever listed on-line; however, they can be ordered.

Here's the BTI page that has the part you are looking for - http://www.bti-usa.com/public/manufacturer/HY/BR/HY8541?page=2#HY8541

Get the number and talk to your local LBS or favorite on-line store and they can get it for.
Hello. My name is Inigo Montoya. You killed my father. Prepare to die.

Offline benjibbad

  • Ninja Master Cyclist
  • ****
  • Posts: 505
  • Karma: +39/-26
  • Gender: Male
    • MY Space
Re: Hayes Stroker Ryde levers
« Reply #2 on: November 11, 2008, 03:55:27 PM »
I think danger boy makes a replacement. You should check them out, I have a pair on my dillinger and they rock, good feel and the look awsome!!
Pedal fast, Hit hard - pain is temporary, and chicks dig scars!!

Check out the Blog:
http://scifdps.blogspot.com/

Offline BillT

  • INCONCEIVABLE
  • Yellow Jersey
  • *****
  • Posts: 1840
  • Karma: +87/-163
  • My Bike: Intense Uzzi VPX w/ 'Slacker' dropouts
Re: Hayes Stroker Ryde levers
« Reply #3 on: November 11, 2008, 04:10:17 PM »
I think danger boy makes a replacement. You should check them out, I have a pair on my dillinger and they rock, good feel and the look awsome!!


I believe Danger Boy is out of business now - but if you are looking for aftermarket brake levers, Straitline (www.straitlinecomponents.com) makes some in a variety of pretty colors.
Hello. My name is Inigo Montoya. You killed my father. Prepare to die.

Offline Slowy

  • Cycling Sherpa
  • ***
  • Posts: 451
  • Karma: +28/-90
  • Gender: Male
Re: Hayes Stroker Ryde levers
« Reply #4 on: November 11, 2008, 06:56:31 PM »
i think i need the entire lever/resevoir, are there aftermarket levers/resevoirs that would be able to hook up to the hose. i would imagine the hose would be universal.

basically my left lever got 'tweaked' and now it does not go back to 'resting' position when you release the lever. i've tried a very little to bend it back but i don't see how the lever is NOT going back on its own.
idk if something is broke on the inside or what.
Joe


"a smite a day keeps the trailbugs away"!

Offline Jim DeLuca

  • Cycling Sherpa
  • ***
  • Posts: 479
  • Karma: +7/-72
Re: Hayes Stroker Ryde levers
« Reply #5 on: November 11, 2008, 06:59:49 PM »
Slowy your alive?   I haven't heard from you since your crash.

Offline Slowy

  • Cycling Sherpa
  • ***
  • Posts: 451
  • Karma: +28/-90
  • Gender: Male
Re: Hayes Stroker Ryde levers
« Reply #6 on: November 11, 2008, 07:03:31 PM »
yeah, still alive. kinda pissed that the trip to santos has cost me $200+
Joe


"a smite a day keeps the trailbugs away"!

Offline BillT

  • INCONCEIVABLE
  • Yellow Jersey
  • *****
  • Posts: 1840
  • Karma: +87/-163
  • My Bike: Intense Uzzi VPX w/ 'Slacker' dropouts
Re: Hayes Stroker Ryde levers
« Reply #7 on: November 11, 2008, 07:35:04 PM »
The site that I linked has all the parts needed to rebuild your brakes piece by piece...you should probably take it to your local shop and they'll get you up and running in no time.  Also, I have a wheel you can borrow if you still need it.
Hello. My name is Inigo Montoya. You killed my father. Prepare to die.

Offline Gregg

  • Forum Moderator
  • Yellow Jersey
  • *****
  • Posts: 3130
  • Karma: +263/-205
  • Gender: Male
  • obsessed...............
  • My Bike: A Kouple of Kool Konas....and a new plastic Titus....
Re: Hayes Stroker Ryde levers
« Reply #8 on: November 11, 2008, 08:57:25 PM »
yeah, still alive. kinda pissed that the trip to santos has cost me $200+

Now your making me feel bad........

Offline Gregg

  • Forum Moderator
  • Yellow Jersey
  • *****
  • Posts: 3130
  • Karma: +263/-205
  • Gender: Male
  • obsessed...............
  • My Bike: A Kouple of Kool Konas....and a new plastic Titus....
Re: Hayes Stroker Ryde levers
« Reply #9 on: November 11, 2008, 09:01:52 PM »
....Also you might try contacting Hayes directly. I didn't see anything on the website that listed seperate parts, but in the past I have had luck by just calling the manufacturer.



I showed Bill where you went off the side of the trail Sunday.

Offline Slowy

  • Cycling Sherpa
  • ***
  • Posts: 451
  • Karma: +28/-90
  • Gender: Male
Re: Hayes Stroker Ryde levers
« Reply #10 on: November 13, 2008, 03:45:06 PM »
well my car must have heard that the bike was getting new stuff, so she surprised me with this wednesday leaving work.....









lower control arm ball joint separated. luckily i was only going like 5-10mph.
need a new ball joint and cv axle, then she's drivable again.

should have seen us getting on the tow truck, lol
Joe


"a smite a day keeps the trailbugs away"!

Offline BillT

  • INCONCEIVABLE
  • Yellow Jersey
  • *****
  • Posts: 1840
  • Karma: +87/-163
  • My Bike: Intense Uzzi VPX w/ 'Slacker' dropouts
Re: Hayes Stroker Ryde levers
« Reply #11 on: November 13, 2008, 04:01:30 PM »
That's some crazy toe out on that wheel!
Hello. My name is Inigo Montoya. You killed my father. Prepare to die.

Offline Gregg

  • Forum Moderator
  • Yellow Jersey
  • *****
  • Posts: 3130
  • Karma: +263/-205
  • Gender: Male
  • obsessed...............
  • My Bike: A Kouple of Kool Konas....and a new plastic Titus....
Re: Hayes Stroker Ryde levers
« Reply #12 on: November 14, 2008, 07:43:13 PM »
You ought to fix the bike first and ride that to work.

 

Advertisement: